2020 Kuhn North America Multi-Master Series 183 6 (5E+1)

2020 Kuhn North America Multi-Master Series 183 6 (5E+1)

KUHN Multi-Master plows are designed to provide operators with the ultimate versatility. With a wide variety of options, easy adjustability from the cab and high quality features that last a lifetime, these plows will be sure to adapt to a wide variety of terrains.

The Multi-Master 153 and 183 plows have been designed to meet the requirements of many operations to provide a machine that is easy to use and strong enough to meet the demands of today’s mid-size to large operations to achieve maximum productivity. This plow range is available from 3 to 7 bottoms in either traction-bolt or non-stop hydraulic. The strength, simplicity and different options available make these plows fully adaptable to your conditions.

Multiple Moldboard Options

• H4 Moldboard: The H4, helicoidal, Scandinavian-type moldboard provides well-formed plowing to a normal depth range of 7-12”. The share is fitted with a reversible/replaceable point that greatly increases the life of the share. Recommended for fall plowing, the H4 moldboard is especially suited for heavy and damp clays. Furrow passes are well defined and trash burial is excellent.

• N Moldboard: The helico-cylindrical N moldboard plows to a depth of 14”. Designed to be highly versatile, it is cylindrical at front, helicoidal at rear. A low draft ensures a partly broken furrow with excellent trash burial. Recommended for spring plowing, this moldboard is versatile and works well in sandy or clay soils.

• VP Slatted Moldboard: The VP slatted moldboard composed of independent and interchangeable slats. Reduces pulling power, due to a lower moldboard surface area. Designed for use in extremely sticky muck and clay soils. Not for use in sand or loam soils or in soils with rocks or stones. The multiple slats allow individual replacement from wear.

Each skimmer is totally independent left from right and is firmly held in a sheath-like support. The skimmers are shear bolt protected and are adjustable in three directions: Forwards and backwards – with a choice of three positions, the sheath bolts to the leg support via countersunk holes to avoid any risk of free play. Up and down – rapid and precise height adjustment (7 ½” of adjustment) also with countersunk holes in the skimmer leg for easy locking of the leg at the desired height. Side to side – for correct adjustment in relation to disc coulter (where fitted).

The main beam is supported by a side-mounted, triangular reinforcement welded along the length of the front section. This strengthens the beam in this high-stress area and gives substantial advantages when compared to a conventional plow design.

Designed for strength and long life, the main link is assembled with either bronze or steel bushings, depending on the model of plow.