2020 Kuhn North America BTC 100 Series 190 Truck

Information

2020 Kuhn North America BTC 100 Series 190 Truck

Redefining Commercial Quality

The efficient material flow of the BTC 100 Series Botec® 4-auger commercial mixers results in fast mixing and a quick, complete cleanout, saving you time and money. Four models are available in truck or trailer configurations, with capacities ranging from 550 to 1,000 ft³.

KUHN Knight BTC 100 Series Botec® 4-auger commercial mixers are ideal for large dairy and feedlot operations. They provide the ultimate ration flexibility to thoroughly mix a wide range of ingredients, including high percentages of byproducts or roughages. The unique Botec design eliminates dead spots for efficient material flow and fast mixing to save you time. A lower horsepower requirement, compared to competitive models, results in less fuel consumption. Multiple discharge options provide fast, even feedout and enhanced reliability from the upgraded auger drive.

The Botec® Advantage

A Quality Ration and Complete Cleanout

The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Mix Full or Partial Loads Due to the cross-mixing action of horizontal auger mixers, Botec® TMR mixers can properly mix batches that fill only a portion of the mixing tub providing you with the versatility to mix any size ration.

Even, Consistent Discharge

The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout.

Competitive Mixers

Having parallel lower augers creates more force between the augers without increasing mixing capability. Parallel augers also do not transition the feed from right to left as well as if the right auger was raised. This design leads to slow, incomplete cleanout, decreases the mixer's processing ability and increases the horsepower requirements.

Photos

Highlights

  • Lloydminster, Alberta
  • 2020
  • Kuhn North America
  • BTC 100 Series 190 Truck
  • Available
  • Tread: 244 cm (96")
  • Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm): 142/157/175 cm (56"/62"/69") | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm): 112/125/137 cm ( 44''/49''/54'') | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm): 122/135/147 cm ( 48''/53''/58'') | Slide Tray - Maximum: 69 cm (27'') | Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm): 140/157/173 cm ( 55"/62"/68") | Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum: 96/109/122 cm (38''/43''/48'')

Specifications

  • 2020
  • Kuhn North America
  • BTC 100 Series
  • 190 Truck
  • Feed Wagons
  • Roller Chain: 120-140H
  • Clevis
  • Front and Rear: 0.6 cm (1/4'')
  • Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Maximum Reach: 46/71/97 cm (18"/28"/38") | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Maximum Reach to Tip-Off End: 79/97/144 cm (31''/38''/45'') | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Maximum Reach to Tip-Off Pivot: 38/56/74 cm (15''/22''/29') | Slide Tray - Maximum Reach: 7 cm (18'') | Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Maximum Reach: 36/61/86 cm (14"/24"/34") | Door Opening Size: 102 x 79 cm (40'' x 31'') | Upper Auger Tube - Wall Thickness: 1.4 cm (9/16") | Lower Auger Tube - Wall Thickness: 1.3 cm (1/2") |Upper Auger Drive Shaft Diameter: 8.9 cm (3 1/2") | Upper Auger Tube - Outside Diameter: 16.8 cm (6 8/8") | Upper Auger Flighting Thickness: 1 cm (3/8") | Upper Auger Flighting Diameter: 71 cm (28") | Lower Auger Flighting Thickness - Front / Rear: 1.9 /1.6 cm (3/4" / 5/8") | Lower Auger Drive Shaft Diameter:8.9 cm (3 1/2") | Lower Auger Flighting Diameter: 71 cm (28") | Lower Auger Tube - Outside Diameter: 22 cm (8 5/8 ")
  • 345 cm (136") | With Extensions: 366 (144")
  • 615 cm ( 242'')
  • Mixing Chamber : 547 cm (216'')
  • Mixer Only: 259 cm (102'')
  • Tread: 244 cm (96")
  • Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm): 142/157/175 cm (56"/62"/69") | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm): 112/125/137 cm ( 44''/49''/54'') | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm): 122/135/147 cm ( 48''/53''/58'') | Slide Tray - Maximum: 69 cm (27'') | Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm): 140/157/173 cm ( 55"/62"/68") | Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum: 96/109/122 cm (38''/43''/48'')
  • Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm): 272/295/310 cm (107"/116"/122") | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm): 282/290/300 cm (111''/114''/118'') | Slide Tray: 267 cm (105'') | Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm): 259/279/295 cm (102"/110"/116")
  • 25.5 m³ ( 900 ft³) | with Extensions: 28.3 m³ (1,000 ft³)
  • Weighing System: Four-Point
  • Unit: 7,983 kg (17,600 lbs)